Department and Graduate School of Mechanical Engineering
Faculty & Staff
 Professor,Chair of Clean Energy R & D Center
|
 |
Haung, King-Leung |
| Educations |
- Ph.D of Mechanical Engineering, National Cheng Kung University, from 1979 / 9 to 1987 / 6 MSE of Mechanical Engineering and Applied Mechanics , The University of Michigan, USA, from 1980 / 1 to 1982 / 1
- M.S. MSE of Mechanical Engineering, National Cheng Kung University, from 1977 / 9 to1979 / 6
- BSE of Mechanical Engineering, National Cheng Kung University, Taiwan, ROC from 1975 / 9 to1977 / 6
- BSE of Armor and Mechanics , Chinese Military Academy, Taiwan, ROC, from1969 / 8 to 1973 / 6
|
| Research |
- Heat Transfer
- Refrigeration and Air Conditioning
- Thermodynamics
- Fluid Mechanics
- Energy
|
| Present Courses |
- Heat Transfer
- Refrigeration and Air Conditioning
- Thermodynamics
- Fluid Mechanics
- The Design of Clean Room
- The Application of Computer in Engineering
- Introduction to Energy Sources
- General Education (Life and Science)
|
| Achievement |
- Qualified Engineer of Mechanical Engineering
- Qualified Engineer of Refrigeration and Air Conditioning Horner:
- Practical product ‘’Intelligent energy saving clothes dryer ” won the prize of the third place of 2004 national wide student of university creative product competition hold in Taiwan University.
- Practical product “Multiple- function air conditioner ” won the champion of the mechanical section of 2004 national wide universty of technology student practical product competition.
- Practical product ‘’One Touch energy saving clothes washing and drying machine ” won the prize of the third place in Electron Group of 2005 national wide student of university practical product competition held in Yun-Lin University of Technology.
- Practical product “Separation type air conditioner without four-way valve” won the prize of the third place in Electric Group of 2005 national wide student of university practical product com
|
| Experience |
-
Professional Career:
| Service Organization |
Department |
Position |
Year / Month |
Kun Shan University of Technology |
Mechanical Engineering |
Professor |
From 1993 / 8 till now |
Chinese Military Academy |
Mechanical Engineering |
Department
Chairman |
From 1990 /1 To 1993 / 7 |
Chinese Military Academy |
Mechanical Engineering |
Professor |
From 1988 /1 To 1993 / 7 |
Chinese Military Academy |
Mechanical Engineering |
Associate Professor |
From 1984 /7 To 1987 / 12 |
Armor Vehicle R & D
Center |
R&D Department |
Engineer |
From 1983 / 7 To 1984 / 6 |
Chinese Military Academy |
Mechanical Engineering |
Instructor |
From 1979 / 7 To 1983 / 6 |
Chinese Military Academy |
Mechanical Engineering |
Teaching Assistance |
From 1977 / 7 To 1979 / 6 |
Army |
Field Forces |
Lieutenant to Captain |
From 1973 / 9 To 1975 / 8 |
|
|
 
|
Professor |
 |
Chang, Win-Jin |
| Educations |
- Ph.D Mechanical Engineering, Cheng-Kung University
- M.S Mechanical Engineering, Cheng-Kung University
- B.S. Mechanical Engineering, Taiwan Institute of Technology
- Mechanical Engineering, Tapei Institute of Technology
|
| Research |
- Heat and mass transfer, Nanotechnology, Microscopic mechanics
|
| Present Courses |
- Engineering mathematics, Heat transfer, Analysis of information facilities for mechanics, Guide for reading engineering papers, Introduction to nanotechnology
|
| Experience |
- Kun Shan University, Dept. of Mechanical Engineering, Professor
- Kun Shan University, Dept. of Mechanical Engineering, Associate Professor
- Kun Shan University, Dept. of Mechanical Engineering, Lecturer
|
|
|
Professor |
 |
Shuhn-Shyurng, Hou |
| Educations |
- B.S. Mechanical Engineering, National Cheng-Kung University
|
| Research |
- Thermal Fluid, Combustion Science and Technology, Energy Engineering
|
| Present Courses |
- Thermodynamics, Fluid Mechanics, Heat Transfer, Thermal Lab.
|
| Achievement |
- Research Awards, National Science Council, Taiwan, R. O. C. (1992)
- The first place award of Ph. D. thesis of Chinese Society of Mechanical Engineering (1993)
- Who’s who in the world (2001)
- Eminent Teaching Award of College of Engineering, Kun Shan University (2005).
- Research Excellence Awards, Kun Shan University, Taiwan, R. O. C. (2005).
- Reviewer of Numerical Heat Transfer (SCI)
- Reviewer of International Journal of Thermal Science (SCI)
- Reviewer of CLEAN AIR - International Journal on Energy for a Clean Environment (EI).
|
| Experience |
- Associate Professor of Department of Mechanical Engineering, Kun Shan University 994/08~ 2003/06
- Associate Professor of Department of Mechanical Engineering, Chienkuo Technology University 1993/08~1994/07
- Instructor of Department of Mechanical Chienkuo Technology University 1992/08~1993/07
|
|
|
Professor, Registrar |
 |
Liu, Chien-Cheng |
| Educations |
- Ph.D Materials Science and Engineering Cheng-Kung University
- M.S Mechanical Engineering National Taiwan University of Science and Technology
- B.S. Mechanical Engineering National Taiwan University of Science and Technology
|
| Research |
- Structural Ceramics, Ceramics Composites, Thin Film Coating, CVD, PVD.
|
| Present Courses |
- Mechanics of Materials, Heat Treatment, Manufacturing Process, Film Coating.
|
| Experience |
- Kun Shan University Dept. Mechanical Engineering Associate Professor, Lecturer, TA
|
|
|
Associate Professor |
 |
Ho, Shing-Huei |
| Educations |
- Ph.D Mechanical Engineering, Cheng-Kung University
- M.S. Power Mechanical Engineering, Tsing-Hua University
- B.S. Mechanical Engineering, Feng-Chia University
|
| Research |
- Automatic Control, Mechanical Vibration, PLC, Pneumatic Control, Mechatronics
|
| Present Courses |
- Automatic Control, vibration, PLC, Pneumatic and Hydraulic Power System
|
| Achievement |
- Reviewer of Journal of CSME
|
| Experience |
- Chairman, Department of mechanical engineering
- Associate Engineer, Formosa Plastics Corporation
|
|
|
Associate Professor |
 |
Chu, Shao-Shu |
| Educations |
- Ph.D. Mechanical Engineering, University of Utah, USA
- M.S. Mechanical Engineering, Auburn University, USA
- B.S. Mechanical Engineering, Chung-YaunUniversity, Taiwan
|
| Research |
- Heat transfer and thermal stress analysis, Computational methods, Semi-conductor processes
|
| Present Courses |
- Numerical methods, Heat transfer, fluid dynamics, Thermodynamics, introduction to semi-conductor processes
|
| Experience |
- Associate Professor, Kun Shan University
- Associate Professor, Kun Shan institute of technology
- Research assistant, University of Utah
- Lecture, Kun Shan institute of College
- Research assistant, Auburn University
- Assistant engineer, engineer analysis division, Yue-Loong Engineering Center
|
|
| teaching blog：http://u4.ksu.edu.tw/T093000099/ |
|
Associate Professor |
 |
Chen, Wei-Ren |
| Educations |
- Ph.D., Department of Mechanical Engineering, National Cheng Kung University
- M.S., Department of Mechanical Engineering, State University of New York at Buffalo, U.S.A.
- B.S., Department of Mechanical Engineering, National Cheng Kung University
|
| Research |
- Mechanism Design, Servo Mechanism Design, Computer Aided Design
|
| Present Courses |
- Mechanisms, Mechanical Design, Computer Programming, Computer Aided Drawing, Computer Aided Design and Manufacturing, Kinematic and Dynamic Analysis and Practice of Mechanisms
|
| Achievement |
- Lead a team and had “Innovative Award” in “The 5th National Innovative Mechanism Design Competition”
|
| Experience |
- Lecturer, Department of Mechanical Engineering, Kung Shan Institute of Technology,
- Engineer, Division of Precision Components, Foxconn Electronics, Inc.
|
|
|
Associate Professor |
 |
Yur, Jiahn-Piring |
| Educations |
- Ph.D Mechanical Engineering Cheng-Kung University
- M.S Mechanical Engineering Cheng-Kung University
- B.S. Mechanical Engineering Cheng-Kung University
|
| Research |
- Nanofrabrication and inspection, Optical electrical system, Cleam room, MOME system, Nontraditional machining, SEM inspection.
|
| Present Courses |
- Introduction of nano-engineering, Nanofrabrication and inspection, Introduction of MEMS, Nontraditional machining,Mechanical material, Design of MOMES.
|
| Achievement |
- Mechanical monthly magazine the third annual paper Golden-Pen award takes first rank.
- Mechanical monthly magazine the fourth annual paper Golden-Pen award takes first rank.
- The top candidate of PhD entrance examination of Mechanical Engineering National Cheng-Kung University
- Instruction student got award of Industrial Bank.
|
| Experience |
- Kun Shan University college of Engineering nanotechnology center R&D headman.
- Education ministry nanotechnology training center committee member of KSU
- Union south Taiwan nanotechnology committee member of KSU
- Kun Shan University of Technology Dept. Mechanical Engineering lecture
- Mechanical Engineering National Cheng-Kung University research assistant.
- Mechanical Engineering National Cheng-Kung University assistant.
|
|
|
Associate Professor |
 |
Liao, Pei-Kai |
| Educations |
- Ph. D., The University of Birmingham, UK
|
| Research |
- Micro/Nano Tribology, Composites of Polymer, Micro and Precision Manufacture
|
| Present Courses |
- Mechanical Materials, Engineering Mathematics, Composite Materials, Reverse Engineering
|
| Achievement |
- Referee, Proceedings of 2005 Conference on the Tribology and Materials Technology
|
| Experience |
- Associate Professor, Nan Kai College
|
|
|
Associate Professor |
 |
Lu, Jeng-Jorg |
| Educations |
- Ph.D,Physics,National Chen Kun University, Taiwan
- M.S., Physics,National Chen Kun University, Taiwan
- B.S., Physics, National Chen Kun University, Taiwan
|
| Research |
- Wide band metal-oxide thin film
- Strongly correlated electron system
- Magnetism
- Condensed matter Physics
|
| Present Courses |
|
|
|
Associate Professor |
 |
Sun, Shu-Huang |
| Educations |
- Ph.D Mechanical Engineering Cheng-Kung University
- M.S Mechanical Engineering Cheng-Kung University
- B.S Mechanical Engineering National Central University
|
| Research |
- Mechanism Design, Optimization, CAD/CAM/CAE, FEM, Precision Plastic Injection
|
| Present Courses |
- Computer Aided Drawing, CAE in Mechanism & Dynamic, Computer Aided Engineering, CAD/CAM, Optimization, Mechanism, Dynamic of Machinery
|
| Experience |
- Manager of R&D Dept., Fu Chun Shin Machinery Manufacture Co., Ltd
- Senior Engineer of R&D Dept., Fu Chun Shin Machinery Manufacture Co., Ltd
- Chairman of Mechanism Analysis Dept., Nan Rong Mechanical Co., Ltd
- Control Engineer, Engineering, Asia airplane Co., Ltd
|
|
|
Associate Professor |
 |
Lai, Tien-Hsing |
| Educations |
- Ph.D., Department of Mechanical Engineering, National Cheng Kung University
- M.S., Department of Mechanical Engineering, National Cheng Kung University
- B.S., Department of Mechanical Engineering, National Taiwan Institute of Technology
- Mechanical Engineering, National Taipei Institute of Technology
|
| Research |
- Creative Mechanism and Machine Design, Robotics & Automation
|
| Present Courses |
- Mechanisms, Mechanical Design, Mechanics of Materials Engineering Drawing
|
| Experience |
- Design Engineer, Shihlin Electric & Engineering Corporation
- Lecturer, Dept. Mechanical Engineering, Kung Shan Institute of Technology and Commerce
- Lecturer, Dept. Mechanical Engineering, Kun Shan University of Technology
|
|
|
Assistant Professor |
 |
Wu, Tser-Son |
| Educations |
- Ph.D Mechanical Engineering Cheng-Kung University
|
| Research |
- Internal combustion engine, Numerical heat transfer, Automotive Fuel
|
| Present Courses |
- Automotive Fuel, Internal combustion engine, Engine dynameter testing, Applied electric experimentation, Sensor principle
|
| Experience |
- RMRC ,Chinese petroleum corporation, Fuel department, Researcher
|
|
|
Assistant Professor |
 |
Chu, Hsiao-Yeh |
| Educations |
- Ph.D National Cheng Kung University
|
| |